The Reverse Connections sub tab provides a real-time view of all active Reverse connections to the Gateway Server. A Host will use a Reverse connection to establish and maintain a Gateway connection to the Gateway Server if it is not located in the same domain (i.e. cannot reach the Active Directory being used by the Gateway Server.) This is often the case if the Host machine is located behind a different firewall or NAT device.
Below is a table of fields, values and icons available for each Host with an active Reverse connection:
Parameter
Description
Host
Name of the Host machine with active Reverse connection to the Gateway Server.
Address
IP address of the Host machine in either IPv4 or IPv6 format.
Protocol
Protocol and port being used by the Host for the Reverse connection .
Transient Type
Type of Host between Installed Host, Host on Demand, VDI Host, RDS Host
Start Time
Date & time when the Reverse connection was started.
Actions
Actions that can be taken on this Reverse connection.
Disconnect
Terminate the Reverse connection from the Host to the Gateway Server immediately