Command
|
Value(s)
|
Notes or Syntax
|
/P
(No port specification)
|
TCP
UDP
|
For TCP/IP protocol. No quotes required.
For UDP/IP protocol. No quotes required.
The default (standard) port is assigned in each case.
|
/P
(With port specification)
|
Protocol name|port pair (see above for the allowed protocol name values). The entire phrase is in quotes.
|
Syntax: /P"Protocol_name|Port_number"
Example: /P"TCP|5001"
The vertical bar is required as a separator for the protocol/port number pair.
|
/U
|
String value for username in quotes.
|
Typically, the required format is
/U”domain\user_name”, as in /U”ACME\george”.
|
/X
|
String value for the password in quotes.
|
Example: /X"foo"
|
/W
|
String value for the new title in quotes.
|
Example: /W"Stock Traders"
|
/G
|
String value for the PC-Duo Gateway name in quotes.
|
When you specify the PC-Duo Gateway, you must also specify the Host computer using the Host key Gateway syntax for /S, as described for Gateway-managed connections. When you specify the PC-Duo Gateway and protocol (using /P), the protocol applies between the local PC-Duo Master computer and the PC-Duo Gateway.
|
/S
|
In quotes, the string value for the station name, DNS name, or network address specifier for peer-to-peer Host computer connections.
|
The peer-to-peer syntax depends on your protocol specification.
|
/V
|
In quotes, the string value for the station name, DNS name, or network address specifier for VNC server connections.
|
Examples:
/PTCP /V"192.168.160.138"
/PTCP /V"Mac VNC Server"
|
/PTCP /S
or
/PUDP /S
|
network_address
station_name
dns_name
|
Examples:
/PUDP /S"192.168.160.138"
/PTCP /S"jackson"
/PTCP /S"jackson.acme.com"
|
/S
|
In quotes, the string value for the Host key for remote connections through a PC-Duo Gateway:
u “w={host_key}”
u “u=host_key”
|
The Gateway syntax depends on the managed Host specification:
Use u for a logged-in user, and w (with curly braces) for a workstation.
To find the Host key, navigate to the managed Hosts tab of the PC-Duo Master console window. Select the PC-Duo Gateway and display its list of managed Host computers. Right-click the desired Host computer, and select Properties. The Host key displays.
NOTE: The u and w that you use for the PC-Duo Gateway syntax of /S are independent of the /U and /W commands.
|
/G /S
|
Gateway_Name and Workstation_Host_Key
or Gateway_Name and User_Name
|
Examples:
/G”Gateway1” /S”w={6F93DF16-8352-46EB-ADDF-7FD752EA72FA}”
/G”Gateway1“ /S”u=ACME\george"
|
/R
|
Gateway_Name and SessionID
|
Specify a GUID session ID of recording on a Gateway to be played:
/G”Gateway1” /R"{92E3970A-682E-4B93-B4A4-925F96E89E85}"
|